Lexus Warranty & Coverage

[Upbeat music plays.]

[A Lexus vehicle drives along the road.]

[A caption reads: “The features and functions described in this video might not be applicable to your Lexus model. See your Owner’s Manual for details. Procedure is for the 12-volt battery only. The hybrid traction battery cannot be boosted”]

[A caption reads: “For 12-volt battery only. Consult your Owner’s manual. Features may vary.”]

Narrator: Your Lexus Hybrid has two batteries: the hybrid traction battery and a 12-volt battery that starts the system. If the 12-volt is discharged, you can boost it—just like a gas vehicle—using jumper cables and a second vehicle.

[A caption reads: “Step 1: Open hood, fuse box and jump-start terminal cover“]

[An open hood reveals the vehicle transmission.]

[A person removes a fuse box cover.]

[A person removes a jump box terminal cover.]

Step 1.Open the hood, the fuse box cover, and the jump-start terminal cover.

[A caption reads: “Step 2: Connect positive cable → Hybrid terminal”

[A person connects a cable to a jump-start terminal.]

Step 2: Connect the positive cable to the Hybrid’s jump-start terminal.

[A caption reads: “Step 3: Connect positive cable → Second vehicle positive terminal”]

[A person connects a cable to a positive terminal,]

Step 3: Connect the other end of the positive cable to the positive terminal of the 12-volt battery in the second vehicle.

[A caption reads: “Step 4: Connect negative cable → Second vehicle 12-volt battery negative terminal

[A person connects a cable to a negative terminal

Step 4: Connect the negative cable to the negative terminal of the second vehicle's 12-volt battery.

[A caption reads: “Step 5: Connect negative cable → Hybrid metallic point

[A person connects a cable to a metallic point.]

Step 5: Connect the other end of the negative cable to the designated metallic point on your Hybrid.

[A Lexus 2025 RX500h/RX350h Owner’s Manual is highlighted.] Check your Owner’s Manual for exact locations.

[A caption reads: “Do not attach to Bolts or nuts in fuse box, near ECM or near the inverter”]

[An X is placed over a nut and bolt.]

[An X is placed over an Engine Control Module.]

[An X is placed over an inverter.]

Never clamp to bolts or nuts in fuse box , near ECM or near the inverter.

[A caption reads: “Step 6: Start second vehicle → hold engine speed ~5 min”]

[A tachometer rises slightly.]

Step 6. Start the second vehicle. Hold engine speed slightly above idle for about 5 minutes.

[A caption reads: “ Step 7: Start Hybrid → confirm “READY” light”]

[A foot presses on a brake pedal.]

[An engine stop/start button is highlighted.]

Step 7. On the hybrid, apply the brakes and press the start button. [A dashboard Ready light is highlighted.]

Confirm the “READY” light turns on in the dashboard.

[A caption reads: “Step 8: Remove cables in reverse order → Close covers”] [A person removes cables.]

[A person closes a fusebox cover/]

Step 8.: Remove the cables in reverse order and close all covers. [A Lexus logo appears.]

[A caption reads: “Experience Amazing”] [A caption reads: “Lexus.ca”]

[Upbeat music fades to silence.]